How To Replace Miele Filter

Miele HEPA and Charcoal Filters: Installation, Maintenance, and Upgrading

May 23, 2019 Posted past DEANA MEDINA

Upgrading Your Miele to a HEPA Filter

Do you have a Miele vacuum cleaner? Exercise you want to upgrade to a HEPA or Charcoal filter? In one case y'all know what to do, it's very like shooting fish in a barrel! Here are all the steps, along with visuals, and a video to make upgrading your Miele filtration, piece of cake :).

CLICK HERE To Lookout Our Video on: Changing or Upgrading Miele HEPA / Charcoal Filters

Step i:

Remove the entire housing for your AirClean filter.

You are going to take out the top/bottom honeycomb similar sandwich that houses your AirClean filter. To practice this, yous are simply going to grab it, and pull upwardly and towards you.

Step ii:

Proceed the AirClean filter encasement and a spare AirClean filter. You might forget to buy a HEPA filter, or want it in the futurity. Don't throw it away, and never use your vacuum without a filter in identify.

Footstep iii:

Buy the correct HEPA or Charcoal filter for your auto.

Stride 4:

Install the HEPA/Charcoal filter in the infinite where you just removed your AirClean filter encasement. In that location are protrusions on your HEPA filter, that will line up with indentations in your Miele vacuum cleaner.

With the HEPA/Charcoal filter writing facing you, push your HEPA/Charcoal filter toward the back of the motorcar, then press down, towards the flooring.

Pace 5: You may or May not hear a "Click"

If your HEPA/Charcoal filter fits in the infinite, and y'all are able to close your hat, then your HEPA/Charcoal filter is deeply in place. If you cannot close your lid, and then make sure your HEPA/Charcoal filter is firmly pressed down. You may or may not hear a click when you install your new filter, and information technology will have a little pressure. This is due to the safe seal around your HEPA / Charcoal, which ensures you have a very tight seal and no air escapes the sides of the filter.

Step 6: The AirClean Filter

If you have upgraded to a HEPA/Charcoal filter, you no longer need the AirClean filter.

You will NEVER use this filter if yous have a HEPA or Charcoal filter. Do not install the AirClean anywhere in your motorcar.

This AirClean filter is Miele's base level filtration, and you lot can toss this filter.

Pace 7: Your Motor Filter.

You WILL however, still need to alter your motor filter (the spongy filter with the cutting lines) every iv numberless, or every ane box. This filter is located inside the canister trunk opposite where your handbag clips into, or behind your bag if you have an upright or a stick vacuum. This motor filter and an AirClean filter are included with each box of Miele bags.

Please Notation:

Classic and Upright Models Take:

-SF HA thirty HEPA Filters

-SF AA thirty Charcoal Filters

Compact and Consummate Models Accept:

-SF HA 50 HEPA Fitlers

-SF AA 50 Charcoal Filters

Have whatsoever questions? We are always here and happy to help! Call, Chat, or Email Us Now!

How To Replace Miele Filter,

Source: https://vacuumcleanermarket.com/blogs/news/upgrading-your-miele-to-a-hepa-filter

Posted by: hortonegary1939.blogspot.com

Share this post